the pieces for the beds
You have put away your baby bed AT4 In the garage, and now that you need it, you can't find the screws?
Don't replace this bed just because of a few misplaced parts.
We've carefully designed beds that can last for multiple births, and even generations! We don't want them to disappear because of a few lost screws. Together, we can extend the lifespan of your furniture.
Choose your spare parts, screws and/or wooden components from the list below or contact our Customer Service if you need to be accompanied.
Be aware: Spare parts are 100% refunded in the form of a voucher!
After your order has been shipped, you will automatically receive a voucher of its value, which can be used on the website. at4.com*
So, there's no reason to hesitate any longer!
10 results displayed
-
Set of 4 supports for box springs6,90 €In stock
Add to cartSet of 4 supports for box springs
In stock
Bag of 4 supports for box springs in the upper part D and E diameter 5mm.
Set of 4 hooks and ends for installing the bed base in the high position in baby beds.
These spare parts are compatible with beds AT4 whose references are listed below.
(references visible on the invoice, the assembly instructions or the standard label on the item).If in doubt, do not hesitate to contact our Customer Service, our advisors will be able to advise you:
Contact form6,90 € -
Set of 6 supports for box springs6,90 €In stock
Add to cartSet of 6 supports for box springs
In stock
Bag of 6 supports for baby bed bases type T5005.
Set of 6 hooks and ends for installing the bed base in the high position in baby beds.
These spare parts are compatible with beds AT4 whose references are listed below.
(references visible on the invoice, the assembly instructions or the standard label on the item).If in doubt, do not hesitate to contact our Customer Service, our advisors will be able to advise you:
Contact form6,90 € -
Set of straps for Cododo cradle12,90 €In stock
Add to cartSet of straps for Cododo cradle
In stock
Co-sleeping cradle strap set.
This set includes 2 large straps with retaining plates (notice reference 1055 or H) and 2 small straps (notice reference 1056 or I).These spare parts are compatible with the products AT4 whose references are listed below.
(references visible on the invoice, the assembly instructions or the standard label on the item).If in doubt, do not hesitate to contact our Customer Service, our advisors will be able to advise you:
Contact form12,90 € -
Crib mattress 40 x 80 cm16,40 €In stock
Add to cartCrib mattress 40 x 80 cm
In stock
Crib mattress AT4
Ideal for baby's first months, this small mattress fits all 40 x 80 cm cribs from various brands. AT4, WEBABY et JURABABY.
Its thickness is 4 cm and its density is 16 kg/m³.
Outer composition: 100% polypropylene / inner: 100% polyurethaneThis accessory is compatible with the products AT4 whose references are listed below.
(references visible on the invoice, the assembly instructions or the standard label on the item).If in doubt, do not hesitate to contact our Customer Service, our advisors will be able to advise you:
Contact form16,40 € -
Set of 4 white hooks6,90 €In stock
Add to cartSet of 4 white hooks
In stock
Set of 4 white hooks.
Set of 4 hooks for stabilizing playpen bases and certain baby bed bases.
These spare parts are compatible with playpens and baby cots. AT4 whose references are listed below...
(references visible on the invoice, the assembly instructions or the standard label on the item).If in doubt, do not hesitate to contact our Customer Service, our advisors will be able to advise you:
Contact form6,90 € -
Set of 4 gray hooks6,90 €In stock
Add to cartSet of 4 gray hooks
In stock
Set of 4 gray hooks.
Set of 4 hooks for stabilizing playpen bases and certain baby bed bases.
These spare parts are compatible with playpens and baby cots. AT4 whose references are listed below...
(references visible on the invoice, the assembly instructions or the standard label on the item).If in doubt, do not hesitate to contact our Customer Service, our advisors will be able to advise you:
Contact form6,90 € -
Set of 4 castors with brakes9,90 €In stock
Add to cartSet of 4 castors with brakes
In stock
Bag of 4 swivel castors with brakes.
Set of 4 white casters and coordinating insert sockets.
These spare parts are compatible with the products AT4 whose references are listed below.
(references visible on the invoice, the assembly instructions or the standard label on the item).If in doubt, do not hesitate to contact our Customer Service, our advisors will be able to advise you:
Contact form9,90 € -
Complete bed screws type T110110,90 €In stock
Add to cartComplete bed screws type T1101
In stock
Complete bag of bed hardware type T1101 including:
- 12 screws M6x60 hollow hexagonal flat head 4mm,
- 12 cylindrical nuts M6 10×14,
- 4 plastic washers d18,
- 4 box spring supports,
- 1 hexagonal key 4mm.
These spare parts are compatible with baby beds AT4 of type T1101, the references of which are listed below.
(references visible on the invoice, the assembly instructions or the standard label on the item).If in doubt, do not hesitate to contact our Customer Service, our advisors will be able to advise you:
Contact form10,90 € -
Complete bed screws type T1310,90 €In stock
Add to cartComplete bed screws type T13
In stock
Complete bag of bed hardware type T13 including:
– 8 screws M6x60 Flat head hexagonal socket 4mm;
– 8 cylindrical nuts M6 10×14;
– 4 M6 cap nuts 5mm hollow hexagonal flat head;
– 4 angled bed supports M6x85mm;
– 1 4mm hexagonal key;
– 1 5mm hex keyThese spare parts are compatible with baby beds AT4 of type T13, the references of which are listed below.
(references visible on the invoice, the assembly instructions or the standard label on the item).If in doubt, do not hesitate to contact our Customer Service, our advisors will be able to advise you:
Contact form10,90 € -
Bag of 4 screws + cylindrical nuts6,90 €In stock
Add to cartBag of 4 screws + cylindrical nuts
In stock
Bag of 4 6×60 screws + 10×14 cylinder nuts including:
– 4 screws M6x60 hollow hexagonal flat head 4mm (current instructions reference 1011);
– 4 cylindrical nuts d10x14 (current reference 1012);
– 1 4mm hexagonal assembly key (current reference 1002).
These elements were generally identified A, C and Z1 on our oldest bed notices.Components compatible with a large number of items AT4, check the dimensions indicated on the drawings in your instructions.
If in doubt, do not hesitate to contact our Customer Service, our advisors will be able to advise you:
Contact form6,90 €
* A personalized voucher, worth the value of the spare parts and associated delivery costs, valid for 3 months on the website at4.com (minimum purchase specified by email).